Competency Training Courses – 1

Training Courses Programs

Course Name: Triplex Pump (MUD Pumps) & Centrifugal Pumps & Compressors

 

Target Audience: Supervisors, Engineers & Facility/Utility Engineers, Technicians, Operating Personnel or Anyone who require a working level knowledge of pumps & compressors

Date: 31 (Five (5) days Training)

Time : 3pm – 8pm

Venue: Abu Dhabi, UAE

Validity :

Pre-requisite: None

Cost:

Course Name: IWCF Drilling Well Control Level 2

 

Target Audience: This training is recommended for anyone who requires a Driller or Supervisor Well Control Certificate.

Date: (4 Days)

Time : 9am – 4pm

Venue: Abu Dhabi, UAE

Validity : 5 Years

Pre-requisite: None

Cost:

Course Name: IWCF Drilling Well Control Level 3

 

Target Audience: This training is designed for people in critical well control positions on drilling installations as well as onshore roles.

Date: (5 Days)

Time : 9am – 4pm

Venue: Abu Dhabi, UAE

Validity : 2 Years

Pre-requisite: Drilling Well Control Level 2

Cost:

Course Name: Heat Exchanger

 

Target Audience: Mechanical, Process, Planning & Vibration Engineers and Supervisors

Course Outcome: Protection & Corrosion problems in Industry

Date: Five (5) days Training)

Time : 8am-1pm

Venue: Mussafah, Abu Dhabi, UAE

Cost:

Course Name : Triplex Pump (MUD Pumps) & Centrifugal Pumps & Compressors

 

Target Audience: Supervisors, Engineers & Facility/Utility Engineers, Technicians, Operating Personnel or Anyone require a working level knowledge of pumps & compressors

Course Outcome: The course will provide engineers and technicians with information for the optimal selection, operation and maintenance of positive displacement pumps specially piston pumps (duplex & triplex pumps) as well as positive displacement and dynamic compressors

Date: Five (5) days Training)

Time : 3 pm- 8pm

Venue: Mussafah, Abu Dhabi, UAE

Cost:

Course Name: Boiler & Steam Turbine

 

Target Audience: The course will not only be of great benefit to operation & maintenance staff but also for inspection & process engineering personnel.

Course Objective: The course will also highlight the main operational troubles and how to be traced & rectified.

Date: (Five (5) Days)

Time : 8am-2pm

Venue: Mussafah, Abu Dhabi, UAE

Cost:

Course Name: Process Safety Management

 

Target Audience: Operations Managers, Safety and Executive, Process Engineers, Safety and Mechanical, Environmental Management and Technicians

Course Objective: Perform day to day process safety management decision making and assess and manage plant risks at all stages.

Date: (Five (5) Days)

Time : 8am-2pm

Venue: Mussafah, Abu Dhabi, UAE

Cost:

Course Name : Tripod Beta (Investigator 3) Accredited Course

 

Target Audience : The target audience of this training consists of, though is not limited to: incident investigators, (Q) HSE, project, site, plant, operations, risk, maintenance, and integrity managers. Course Objective : Tripod Beta Training teaches participants the Tripod theory and approach, and how to investigate and analyses operational disturbances.

Date : (Four (4) Days)

Time: 8am to 2pm

Venue: Mussafah, Abu Dhabi, UAE

Cost:

Course Name: Abnormal Management Situation

 

Target Audience: Process and Operation Engineers, Supervisor and all those employees who are relevant to attend the training.

Course Objective: Demonstrate the hazards associated with poor situational management

Date: (Two (2) Days)

Time: 8am to 2pm

Venue: Mussafah, Abu Dhabi, UAE

Cost:

Course Name: Process Control for Oil & Gas

 

Target Audience: Gas Plant Field Operators, Oil Station Operators, Control Room Operators, Production Process Supervisors, Gas Process Engineers, Instrument Technician, Supervisor and Process Control Engineers.

Course Objective: This course has been designed to provide training on essential components of a control system used in Oil and Gas plant.

Date: (Three (3) Days)

Time : 8am-2pm

Venue: Mussafah, Abu Dhabi, UAE

Cost:

1         Oil, Gas, Process / Engineering

1        An Introduction to Process Plant Start-up & Troubleshooting

2        API 579 Fitness for Services (FFS) Evaluation of Pressure      Vessels and Equipment

3        Basic Petroleum Technology

4        A Systems Approach To Maintenance

5        Basic of  Gas  Compression Dehydration/Conditioning

6        Autotronics Modern Automotive Technology/ Mechanics & Electronics

7        Basic on  Gas Compression  Principles/Dehydration/Conditioning

8        Basics on Dehydration / Desalting & Facilities operations

9        Basic Of Gas / Compression Flow Measurement / Calculation and Reporting

10      Bearing ,Lubrication & Gearboxes

11      Boiler Water Treatment & Steam Generation

12      Boiler Water Treatment & Desalination

13      Chemical Engineering for Non Chemical Engineers

14      CRU, Operation, Monitoring and Optimization Skills

15      Combustion Techniques

16      Diesel Engine Maintenance

17      Engineering Fundamentals

18      Offshore Structural Design

19      Offshore Structure Type

20      Emergency Shutdown System

21      Engineering Drawing , Codes And Standards

22      Fluid Mechanics

23      Flare and Relief Systems

24      Gas Turbine Operations for Operator

25      Gas Steam Turbine

26      Gas Production & Processing

27      Gas Sweetening & SRU Operation Skills

28      Gas Conditioning and Processing

29      Hydrogenation & in Process Reaction

30      Hydrocarbon Production Operation

31      High- Compression Diesel & Gas Engine Operation, Maintenances & Trouble Shooting

32      Industrial Gas Turbines Operation, Troubleshooting & Maintenance

33      Maintenance Planning & Scheduling

34      Mechanical Seals: Designs, Application, Selection, Installation, Troubleshooting and Maintenance

35      Natural Gas Conditioning and Processing

36      Natural Gas Handling Systems & Facilities

37      Optimization of Equipment / Utilities Operations Techniques

38      Oil Refining and Petrochemical Process Control Technology

39      Oil Movement Storage

40      Oil & Gas Field Operations

41      Oil-Water Separation.

42      Overview of the Oil & Gas Industry

43      Practical Process Control Engineering

44      Plant Operation, Commissioning & Start-Up

45      Petroleum Production Problems and Solution

46      Pneumatic Components and Circuits

47      Production Operations for Process Engineers

48      Predictive Maintenance

49      Preventive Maintenance & Troubleshooting of Rotating Machinery

50      Operations, Troubleshooting and Control of Pumps, Turbines & Compressors

51      Machine Alignment and Condition Monitoring

52      Reliability, Maintainability & Risk

53      Safe Isolation Of Process Plant Equipment

54      Sulphur Recovery and Trouble Shooting

55      Strength and Properties of Material

56      Safety in Process design

57      Shell & Tube Heat Exchanger: Mechanical and Thermal Design

58      Shutdown Planning & Turnaround Management

59      Supervisory Control & Data Acquisition (SCADA)

60      Steam Turbine & Hydrogen Generate

Maintenance

61      Strategic Management of Vocational Training Centers in Oil & Gas Industry and Other Sectors of Industry

62      Quality Assurance Management of Vocational Training Centers in Oil & Gas Industry and Other Sectors of Industry

63      Shaft Alignment and Vibration Analysis

64      The Technical and Economics of Water Flooding

65      Job Safety Analysis in the Oil and Gas industry

66      Transportation,  Marketing and Refining of Crude Oil and Its Refined Products

 

2        Mechanical & Design Engineering

1        API Pump Design and Selection

2        Augmentation of Power and Performances: Improvement Strategies for Gas Turbines and Combined Cycles

3        Boiler Operation & Maintenance

4        Boilers: Design, Operation, Control and Management

5        Basic Pumps Technology

6        Blowers, Compressors and Turbochargers: Operation, Troubleshooting and Maintenance

7        Centrifugal Compressor & Steam Turbine Design, Operation and Maintenance

8        Centrifugal Compressor: Maintenance & Trouble Shooting

9        Compressor  & Steam Turbine Technology

10      Centrifugal  Compressor : Maintenance and Failure Analysis

11      Control & Operation of Centrifugal Gas Compressor

12      Control Valve Maintenance, Operation & Valve Selection Techniques

13      Flow Measurements Techniques/ Meter Types and Selection

14      Fans & Blowers: Selection, Operation, Maintenance and Applications

15      Flow Measurement & Flow Meters

16      Fitness for Service (FFS) for Piping & Pressure Vessels

17      Fundamental of Refinery Catalytic Process

18      Gas Processing Treatment and Sulfur Recovery

19      Gas Turbine 1 : Operation Maintenance and Troubleshooting

20      Gas Turbines 11 : Design, Performance and Reliability

21      Gas Turbine 111: Advanced Engine Systems; Matching; Performance Deterioration and Recovery

22      Gas Turbine Protection: Inspection Control, and Monitoring

23      Gasoline Blending in Refineries

24      Gas & Steam Turbines Plants:Design, Performance and Monitoring

25      Heat Exchangers: Shell and Tube Heat Exchangers Design, Operation, Control and Troubleshooting

26      High – Compression Diesel and Gas Engines: Maintenance and Troubleshooting

27      Improving the Performance & Reliability of Fired Heater & Boiler

28      Machinery Failure Analysis and Troubleshooting

29      Modern Automotive Technology:{Autotroniucs}

30      Mechanical Seals Troubleshooting and Maintenance

31      Instrumentation and Control: Sensors, Actuators, and Industrial Applications

32      Steam Turbine Maintenance: Turbine ,generator, maintenance and troubleshooting

33      Plant Operation, Commissioning & Start-Up

34      Predictive Maintenance

35      Power and Desalination Plants: Based on Gas Steam Turbines

36      Piping and valves: Design, Construction, Operation, Protection and Integrity

37      Pipeline Fabrication and Maintenance

38      Process Equipment, Fired Heater, Air Cooler s, Heat Exchangers, Pumps, Compressors.

39      Process Plant Start up , Commissioning & Troubleshooting

40      Pumps and Compressors: Operation, Troubleshooting and Maintenance

41      Pumps Operation, Maintenance & Troubleshooting

42      Pumps & Compressors In-Service (Operation & Maintenance )

43      Pumps Technology for Juniors

44      Reliability, Maintainability & Risk

45      Refinery Process Operation, Control System &Troubleshooting

46      Refining Process and Petroleum Products

47      Refinery Equipments Operation and Troubleshooting

48      Rotating Equipment: Preventive and Predictive Maintenance

49      Surface Production Operation

50      Shell & Tube Heat Exchanger: Mechanical and Thermal Design, Troubleshooting and Maintenance

51      Trouble Shooting of Modern Refinery

52      Turbine Steam- Path Damages Troubleshooting

53      Valve Maintenance & Technology

54      Valves: Safety Relief Valves: Selection, Operation and Maintenance

55      Valve Types: Operation & Applications

56      Water Injection Process

57      Water treatment for plant utility , Off site & Cogeneration

 

3        Instrumentation & Control Engineering

1        Analytical Instrumentation

2        Automatic Process Control

3        Advanced Process Measurements Course

4        Advanced Microprocessor Based Power System Protection

5        Applied Electronics

6        Advanced DCS Operation

7        Advanced Process Control & Instrumentation

8        Anti-Surge – CCC For Operations

9        Anti-Surge – CCC For Control (for Instrument Tech)

10      Basic Instrumentation & DCS

11      Basics of Instrumentation

12      Basics of Sensors

13      Boiler Operation & Control

14      Control & Operation of Centrifugal Gas Compressor

15      Controllers & Control Loops

16      Control Valve Maintenance, Operation & Valve Selection Techniques

17      Distributed Control Systems (DCS)

18      (DCS) Troubleshooting

19      Flow Measurement & Flow Meters

20      Flow Measurement & Flow Meters

21      Fiscal and Allocation Metering

22      Introduction To Instrument and Control Engineering

23      Industrial Process Control

24      Industrial Valve and Actuators

25      Instrumentation and Control: Sensors, Actuators, and Industrial Applications

26      Oil Refining and Petrochemical Process Control Technology

27      Proportional + Integral +Derivative Control Action

28      Pneumatic System & Troubleshooting

29      Principles of Calibration

30      Principles of Control

31      Programmable Logic Controllers (PLC)

32      P.L.C Fundamental

33      Process Control Instrumentation

34      Reading P& ID

35      Supervisory Control & Data Acquisition (SCADA)

36      Sensors & Actuator and Process Control

37      Temperature, Pressure & Level Measurements

38      Valves: Safety Relief Valves: Selection, Operation and Maintenance

39      Valve Types: Operation & Applications

 

4         Industrial Engineering

1        Changing Challenges for the Operations Managers

2        Cost Accounting for Engineers and Technicians: A Managerial Emphasis

3        Creating Value through Operations Management and Supply Chains

4        Casting Technology

5        Engineering Economy

6        Fundamentals of metal cutting and High speed Machining

7        Foundations for Introducing and Implementing Total Productive Maintenance (TPM)

8        High speed Machining:

9        Introducing and Implementing Preventive Maintenance Programs

10      Just-In-Time & Lean Systems :Japanese Management in Comparison with Western Experience

11      Material Properties

12      Maintenance planning and Management

13      Manufacturing Technology

14      Manufacturing Processes

15      Managers Aiming for Zero Machine Breakdowns

16      New Orientations for Inventory Control & Management

17      Numerical Methods for Engineers

18      Operations and Master Production Scheduling

19      Planning and Controlling Operations and Supply Chains

20      Product Design and Development

21      Preventive Maintenance Planning, Metrics and Benchmarking

22      Quality Experts  Aiming for Zero Defect Products and Processes

23      Strategic Planning and Strategic Management

24      Seven Magnificent Tools  of Statistical Process Control (SPC)

25      Stochastic Processes and Queuing Systems

26      Systematic Approaches in Process Design, Analysis and Decision Making

27      Total Productive Maintenance (TPM) Implementation Steps and Process Improvement Tools

28      Use of Computerized Maintenance Management Systems  (CMMS ) for Maintenance Planning and Management

29      Welding Technology: Metallurgy Aspects, Safety, and Quality

 

5         Petroleum Reservoir And Drilling Courses

1        Advanced Well Control

2        Basic Reservoir Engineering

3        Basic Petroleum Engineering to non-Engineering staff

4        Carbonate Reservoirs

5        Cased Hole Log Interpretation/ Production Logging

6        Completion & Well Intervention

7        Coiled Tubing Operations

8        Drill String Design

9        Drilling & Work over Operations

10      Drilling Engineering and Well Planning

11      Environmental Reservoir in the Oilfield

12      Enhanced Oil Recovery

13      Flow Assurance

14      Field Monitoring

15      Geostatistics

16      High Temperature High Pressure Well

17      Horizontal Well Technology

18      Introduction to Completion Design

19      Open Hole Log Interpretation

20      Production Operations

21      Project Management in E&P in Oil and Gas Industry

22      Petroleum Production Problems and Solution.

23      Production Technology

24      PVT and Phase Behaviour of Reservoir Fluids

25      Production Logging and Reservoir Monitoring

26      Reservoir Engineering

27      Reservoir Management

28      Reservoir Characterization

29      Reservoir Simulation (Introduction)

30      Well Testing

31      Water flooding

32      Well Design and Completion

33      Well Composite, Construction Integrity & Completion

34      Work Over Planning and Well Servicing

35      Well Stimulation

 

6        Electrical Engineering

1        Analysis and Control of Industrial Processes

2        A.C. & D.C. Motor Applications (Level Basic)

3        Basic Machines (A.C. & D.C.)

4        Contents of the Grounding and Measuring Instrumentation Program

5        Conducting Safety Meeting

6        Distributed Control System (DCS)

7        Distribution Network Design and Planning

8        Electrical Equipment & Control Systems

9        Power Plant Performance Monitoring

10      Distribution Planning & Reliability Assessment

11      “UPS’ Installation ,Operation & Troubleshooting

12      The Grounding & Measuring Instrumentation Program

13      Substation Design

14      Underground Power Cable

15      Earthing and Bonding

16      The Cables

17      11KV/ 415 Operation of Electrical Equipment

18      Electrical  Safety

19      Electrical Equipment – Inspection

20      33 KV /11 KV Substation Operation

21      Distribution System Planning in Electrical Network

22      33 KV Substation Circuit Breaker  Maintenance

23      Electrical Power System Planning

24      Electrical Grounding

25      Electrical Inspection & Testing

26      Electrical Installations

27      Electrical Equipment – Installation & Testing

28      Electrical Power Systems Quality & Troubleshooting

29      Electrical Protection and Protective Relays

30      Electrical Safety

31      Electrical Safety and Hazardous Area Classification in the            Petrochemical Industry

32      Electrical Transformers: Operation, Testing and  Maintenance

33      Electrical Equipment Installation, Maintenance &   Troubleshooting

34      Electrical Protection and Coordination

35      Energy Saving and Power Factor Improvement

36      Fault Analysis in Power System

37      High Voltage Operational Safety for Engineers

38      Maintaining & Troubleshooting Electrical Equipment &Technicians(OSHA, NFPA & EN Standards)

39      M.V Switchgear

40      Modern Electric Power Systems: Generation, Transformation, Transmission, Distribution, Substation & Utilization: Design, Modeling, Analysis, Planning, Monitoring, Control, Maintenance & Troubleshooting

41      Operation & Maint. Of C.B. & Switchgear

42      Power Cables Characteristics& Applications

43      Power System Harmonics, Earthing and Power Quality

44      Practical Motor Protection, Testing, Control & Maintenance

45      Preventive & Predictive Maintenance for Overhead Lines

46      Principles of the Maintenance of Electrical Switchgear

47      Substation Operation and Maintenance Techniques

48      Transformer & Generator Protection, Testing & Maintenance

49      Power System Protection

50      Switchgear Operation and Maintenance

7        Civil Engineering

1        Advanced Structural Analysis

2        Advanced Mechanics of Materials

3        Advanced Steel Structure Design, Construction and Inspection

4        Advanced Structural Mechanics

5        Advanced Steel Structure Design and Construction

6        Advanced New Materials in Concrete Construction

7        Concrete Quality Control

8        Civil Engineering Skill for Non-Civil Engineers

9        Design and Construction of Steel Structure

10      Decision Making and Decision Tree Technique

11      Essential material for concrete construction and repair

12      Concrete Quality control

13      Matrix Analysis of Structures

14      Principal of Civil Engineering for Non-Civil Engineering

15      Reinforced Concrete I

16      Reinforced Concrete II

17      Risk Assessment and Decision Making for Petroleum Investment

18      Repair and Maintenance of the Reinforced Concrete Structure

19      Stability of Structures

20      Special Topics (Mechanics of Composite Materials)

21      Strength of Materials

22      Structural Steel Design (using AISC-Specifications)

23      Structural Mechanics for Architects

24      Structural Analysis for Architects

25      Structural Design for Architects

26      Supervising Master Thesis

 

8        Health, Safety & Environment

1        Accident Investigation / Reporting and Lessons Learn

2        ALARP  Assessment & Risk Based Decision Making

3        Availability, Reliability &b Maintainability

4        Advanced Emergency Respond

5        Awareness Of LSA, Ionizing & Non-Ionizing Radiation

6        Air Pollution Control

7        Basic Corrosion

8        Behavioural Safety Audits

9        Business Continuity Management

10      Cleaning of Drinking  Water System with Wessoclean

11      Change Management for Process Safety

12      Computer –Aided Safety Management

13      Chemicals Handling & Industrial Safety: Classification of Hazardous Materials & Their Impact on Human Health

14      Corrosion for Non Corrosion Engineers

15      Corrosion of Iron & Steel Structures

16      Design of Plant Operation: Normal & Recovery

17      Degermination and Disinfection with Wessoclean (Air Application)

18      Environmental Management System (EMS)

19      Energy Conservation and Management

20      Enterprise Safety Knowledge Management

21      Environmental System (ISO 14001)

22      Emergency Preparedness

23      Fundamentals of Non-Destructive Testing

24      Fault Tree Analysis / Event Tree Analysis

25      Failure Mode Effect Analysis

26      Fitness for Service

27      HSE Supervisory (Leadership) Training

28      HSE Management for Managers

29      Hazardous Area Classification

30      Handling Storage & Transportation of Dangerous Goods

31      Handling Hazardous Waste

32      Hazard Identification and Risk Control

33      HSE Excellence Leading For Supervisors

34      Human Factors Engineering

35      HAZOP Process Hazard Analysis for Supervisor

36      Health & Safety in the Workshop

37      Health & Safety in Engineering Projects

38      Health Safety & Environment

39      HSE & QMS Induction & Updates

40      Hazard Identification and Risk  Control For Senior Managers

41      Human Reliability Analysis

42      HSE-MS, HSE cases and Risk Management

43      Introduction To Safety Systems

44      Industrial Fire & Accident Prevention

45      Industry & Company Codes & Standards

46      Integrated HSE & QMS

47      Industrial Safety and Health: Working in a Healthy and Safe Environment

48      Industrial Behavior and Relations

49      IOSH Managing Safely

50      IEMA Associate Certificate in Environmental Management

51      Learn from Past Experiences: Accident / Incidents

52      Leadership of Hazard & Operability Study

53      Load Forecasting and Upgrade system

54      Loss Control

55      Management of Major Emergencies

56      Metallurgy for Non-Metallurgists

57      Maritime Incident Investigation & Root Cause Analysis

58      Major Emergency Management & Control

59      Operating Procedure

60      Oil & Gas Safety, Practices in Japanese Industry

61      Plant Safety Information Management Program

62      Process Shutdown & Relief Systems

63      Oil Spill Response, Modeling &Clean Up Course

64      Oil & Gas Safety, Practices in Japanese Industry

65      Pressure Hose Safety Course

66      Process Control & Safety Systems

67      Process Modeling & Simulation

68      Process Hazard Analysis , HAZOP Study for Team Leaders

69      Plant Safety Information Management Program

70      Process Control & Safety Systems

71      Preventing Human Error

72      Process Safety for Operation Safety Engineers

73      Qualitative & Quantitative Fault Propagation Analysis

74      Revalidating Process Hazard Analysis (PHA)

75      Risk Assessment within Production Operation

76      Root Cause Analysis

77      Review of Reliability Standards (IEC 61709)

78      Reliability Centered Maintenance

79      Risk Assessment & Management

80      Risk Management in Engineering Projects

81      Safety Cases & Risk Assessment

82      Safety Engineering Education

83      Safety Instrumented Systems

84      Safety Auditing

85      Safety Regulations

86      Safety Assessment for Supply Chain Production Systems

87      Safety Audit & Site Inspection

88      Safe Lifting & Materials Handling

89      Safety in the Oil & Gas Safety Industry

90      Oil & Gas Safety, Practices in Japanese Industry

91      Safety Engineering Education

92      Safety Instrumented Systems

93      Safe Transportation & PPE

94      Tutorial On HAZID, Safety Assessment Method, Hands-On Practice

95      Treatment of Municipal & Industrial Sewage Sludge

96      Waste Management & Chemical Handling

97      Workplace Risk Assessment & Safe Systems of Work

98      Waste Water Treatment

99      Working Safely in Hazardous Area

100    Waste Handling & Waste Treatment

101    What If Techniques

 

 

9        Incident Command System (ICS)

1        Application of HAZOP and What-If Safety Review

2        Conduct incident / Accident Analysis

3        Discussions, Understanding, and Applications of OSHA Standards

4        Design and Engineering of Safe Plant Operation

5        Human Engineering for Safe Plant Operation

6        Introduction to the Incident Command System

7        Incident Command System Organization

8        Incident Facilities

9        Incident Resource Management

10      Incident Command System Assignments

11      Learning from Past Experience Using Accidents Database

12      Managing Corporate Safety Knowledge for Improved Risk Management

13      Reliability-Centered Maintenance Practices

14      Safe Process Plant Design Using Activity MO

15      Self-Assessment and Auditing of HSE Management System

16      Systematic Approach for Incident and Accident Analysis

17      Understanding & Implementation of HSE Management System

18      Understanding and management of Safety Interlock Systems

 

10      Corrosion Courses

1        Asset Integrity Management in Oil & Gas Industries

2        Cathodic Protection Systems

3        Corrosion Awareness

4        Corrosion for Non-Corrosion Engineers

5        Corrosion Metallurgy & Failure Prevention

6        Corrosion in the Oil & Gas Industry

7        Corrosion Monitoring & Inhibitor Injection in Oil & Gas Fields

8        Corrosion Control in Refining Industry

9        Corrosion Control in Boiler & Steam Generation Systems

10      Corrosion Prevention in Oil & Gas Industry

11      Corrosion of Reinforcing Steel and Reinforced Concrete

12      Corrosion Resistant Painting, Coating and Lining

13      Fundamentals of Industrial Coatings & Non-Metallic materials application in Chemical & Petrochemical Industries

14      Material Selection for Oil & Gas, Refineries and Desalination Plants

15      Integrity Management in Oil & Gas Industries

16      Microbiological Corrosion in Oilfields

17      Protective Coatings for Steam & Gas Turbine

18      Corrosion Inhibition Principles & Management

 

 

11      Management Development Courses

1        Advanced Methods for Time and Cost Control of Project

2        Appraisal Training

3        Assessor Training

4        Basics of Business Writing Skills

5        Behavioural Interviewing For Performance Management

6        Behavioural Interviewing for Recruitment, Appraisal, and Counselling

7        Coaching and Appraisal

8        Coaching & Mentoring

9        Competencies Management

10      Creative & Innovative Leadership

11      Creativity and Mind Mapping

12      Conflict Management

13      Communication, Negotiation and Presentation Skills

14      Communication & Dealing with Others

15      Counseling Skills For HR Professionals

16      Critical Competencies for Administrators and Secretaries

17      Customer Focus

18      Contract & Vendor Management

19      Customer Service

20      Competitive Intelligence & Benchmarking

21      Development Training for Executive Assistants

22      Effective Meeting & Time Management

23      Effective Thinking & Planning Strategies

24      Excellence in Internal and External Customer Service

25      Effective Performance Appraisals and successful Implementation

26      Estimating Techniques for Engineering Projects

27      Enhancing Leadership Skills

28      Emotional Intelligence

29      Effective Communication and Interpersonal Skills

30      Effective Presentation Skills

31      Experiencing NLP

32      Fundamentals of Human Resources Management

33      Human Resource Management for Women

34      Human Performance Management

35      Interviewing for Recruitment, Appraisal & Performance Counselling

36      Innovation and New Techniques in HR Management

37      Interviewing for Recruitment and Appraisal

38      Improving Personal Effectiveness

39      Influencing Skills

40      Interpersonal & Communication Skills

41      Leading and Managing Organizational Change

42      Leadership and Leadership Styles

43      Lateral Thinking

44      Leadership & Effective Team Building

45      Leadership, Empowerment, and Delegation

46      Leadership Development / Personal Growth

47      Managing Chaos Setting Priorities Under Pressure

48      Motivating & Increasing Work Productivity

49      Managing the Training Function

50      Market Research

51      Managing Multiple Tasks

52      Mentoring Skills

53      Motivating Your Staff for Better Performance

54      Managing and Working With Difficult People

55      Managing Training and Development

56      Mentoring, Coaching & Counselling

57      Mentoring and Instructor Training

58      Negotiation Skills

59      Office Management and Effective Administrators Skills

60      Personal Effectiveness

61      Project Planning Scheduling & Control

62      Problem Solving & Decision Making

63      Performance Management & Productivity Improvement

64      Presentation Skills

65      Procurement Management System

66      Public Speaking

67      Planning, Organizing & Control

68      Supervisory Management and Leadership Competencies

69      Supervision Skills

70      Self Development

71      Secretarial Excellence Skills

72      Secretarial Intermediate Skills

73      Secretarial Junior Skills

74      Strategic Training Needs Analysis, Evaluation & Implementation

75      Supervisory Leadership

76      Strategic Leadership

77      Supervisory Skills for New Managers

78      Telephone Skills

79      Team Work

80      The Key Skills of Training  Assessor

81      Time & Stress Management

82      Techniques for Interviewing, Testing and Effective Selection

83      Technical Report Writing Skills

84      Train the Trainer-Facilitation Skills

85      The 7 Habits

86      Team Building

87      Win-Win Negotiation Skills

88      Work Ethics

89      The Innate Directed Diet – 7 steps to reaching your ideal weight without dieting fads

90      S.O.S –  Save Our Spines – 10 daily postural & exercise essentials to optimize your back

91      The 4 B’s to Beating stress and Bringing Balance into your home and work life

92      Cracking the Kid Code – 5 techniques for transforming your child from school hater, to school appreciator

93      Emotional Self Suficiency Training

12      Project Management Courses

1        Advanced Construction Management, Contracting & Project Execution.

2        Construction Scheduling, Resources and Site Operations Planning.

3        Comprehensive Preparation for the Project Management Professional (PMP) Certificate (With Sample Exams).

4        Comprehensive Project Planning & Management: Route for Success

5        Capital Project Management, Economics & Cost Engineering

6        Contract Management

7        Contract Management Principles & Practices Course

8        Introduction to Project Management

9        Effective Risk Assessment & Management in Engineering Projects

10      Project Risk Management

11      Managing Projects

12      Project Management for Intermediate & Advanced Levels.

13      Preparation for the Project Management Professional (PMP) Certificate.

14      Quality for Project Engineer Course

15      Project Planning, Scheduling & Control

16      Project Management Essential

13      Supply Chain Management

1        Auditing Supply Chain

2        Driving Business Change Through People

3        Dangerous Goods Handling, Transportation and Storage

4        Introduction To Logistics 3- Days

5        Enabling Supply Chains Through E-Business

6        Management & Purchasing Strategies and Cost Reduction

7        Managing International Trade and Freight Forwarding

8        Performance drivers in the Supply Chain

9        Materials & Supply Chain Flows

10      Practical Forecasting

11      Practical Benchmarking

12      Practical Project Management

13      Practical Negotiating

14      Practical Spreadsheets Modelling

15      Practical Inventory Techniques

16      Purchasing : The A To Z Course

17      Purchasing Strategies ,Tactics and Cost Reduction

18      The Effective Inventory Manager

19      The Effective Distribution Manager

20      The Effective People Manager

21      The Effective Logistics Manager

22      The Effective  Transport Supervisor

23      The Effective Supply Chain Manager

24      Warehousing Management

25      The Effective Warehouse Manager

14      Finance & Accounting

1        Advanced Financial Statements Analysis

2        Advanced Accounting

3        Advanced Excel Applications in Business Analysis

4        Advanced Product Pricing & Market Strategy

5        Advanced Accounting & Finance

6        Balance Scorecard & Key Performance Indicator

7        Basic Accounting

8        Capital Recovery & Fixed Assests Valuation

9        Budgeting, Forecasting and Business Planning

10      Finance For Non-Finance Staff

11      Finance Basics

12      Fundamentals of Finance & Accounting

13      Finance For Non- Finance Mangers

14      Financial Planning and Control

15      Effective Budgeting and Cost Control

16      Financial Report Writting Analysis

17      Financial Decision Making

18      International Accounting Standards

19      Finance & Cash Flow Management

20      Purchasing Stratégies and Cost Reduction

21      Intermediate  Accounting